Equipos mineros y de excavación de roca
KJ310 Equipo de Perforación de desarrollo con orugas
El modelo Split Mountain KJ310 es una perforadora de desarrollo electrohidráulica con una pluma que está diseñada para excavaciones con un franqueo superior de hasta 2 metros (6,6 pies). Este equipo de perforación minera presenta una pluma universal resistente con una gran cobertura de forma óptima, rotación de 360 grados y paralelismo automático total para perforaciones frontales y cortes transversales rápidos y simples.
Ventajas
Diseño compacto y resistente que es ideal para áreas o trabajos de servicio pequeños.
Tren de rodaje con orugas resistente que ofrece estabilidad de perforación y una alta capacidad de acarreo.
Sistema de control hidráulico manual que facilita la operación y el mantenimiento
Datos técnicos
| Hydraulic Drifter/Rock Drill | Control System | ||
| Type | HC109 | Anti-jamming control | Yes |
| Percussion power | 18.8kW | Rotation control | Adjustable/Reversible |
| Percussion pressure | Max. 135 bar | Flushing control | Water flow and pressure |
| Percussion rate | 47Hz | Percussion control | Adjustable power |
| Rotation torque | 780 Nm | Voltage | 24V |
| Hole size (bolting) | ∅42-102 mm | Carrier | |
| Shank adapter | T45 / R38 male | Type of carrier | Track / Crawler |
| Boom | Tracks | triple grouser, sealed and lubricated | |
| Parallel holding | Complete | Width | 305 mm / 12 in |
| Lifting angle | Up55°,down 16° | Cummins engine QSB-C80-31 | 60 kW,Tier 3 |
| Swing | left 35°,right 35° | Transmission | Double-speed motor |
| Extension | 1600 mm | Tramming speed | Max.2.5 km/h |
| Feed extension | 1200 mm | High gear | Max.2.5 km/h |
| Feed roll-over angle | 360° Rotaty Actuator | Low gear | 1.2 km/h |
| Hydraulic System | Hydraulic jacks, front | 2 extendable | |
| Powerpack | 1 x 55 kW | Oscillation angles | +/- 10° |
| Percussion pump | 100 cc (variable) | Gradeability / sideways tilt | Max. 25° / 5° |
| Rotation pump | 55 cc (gear) | Ground clearance | 180 mm |
| Filtration | 10 µ | Centralized greasing points | 8 ports |
| Oil tank volume | 200 liters | Air And Water System | |
| Cooler for hydraulic oil | Oil-to-water 1 x 30 kW | Flushing | By water |
| Electric System | Water pump capacity | 50 l/min | |
| Standard voltages | 380 - 690 V (± 10%), 50 or 60 Hz | Rock drill oil consumption | 180 - 250 g/h |
| Total installed power | 70 kW | Rock drill air consumption | 300 l/min |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Air compressor | 0.5 m³/min (7 bar) |
| Cable Reel | 80m-100m | Overall with rods 3m,others depending on options. | |
| Cable reel lubrication | Manual | Weight | 12000 kg |
| Cable reel mud clean | Manual | Transport length | 10700 mm |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / drilling width | 1650 mm / 2300 mm |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 1880 mm / 2480 mm |
| Percussion hour meters | Optional | Turning width(T-section) | 2800 mm |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R3263 / R5400 mm |
Below dimensions in mm,and against drilling steels/ rods length 3700mm.Optimum operating coverage about 35 m2.
Tailor-made specifications accepted.
Split Mountain Machine And Equipment Co.,Ltd. Copyright©splitmountainmachine.com Rights Reserved.