Equipos mineros y de excavación de roca
Equipo de perforación ITH (martillo de fondo) KSQ31 para perforación subterránea
KSQ31 es un equipo de perforación martillo en fondo (ITH, in-the-hole) montado sobre orugas. Este equipo de perforación para tareas subterráneas presenta martillos ITH accionados con aire comprimido, es una máquina resistente para perforaciones con un diámetro de 89 a 216 milímetros y para tareas de ensanchamiento de hasta 444 milímetros.
VentajasDiseño compacto y resistente que es ideal para áreas o trabajos de servicio pequeños.
Tren de rodaje con orugas resistente que ofrece estabilidad de perforación y una alta capacidad de acarreo.
Sistema de control hidráulico manual que facilita la operación y el mantenimiento.
Diseño apto para su uso con manipuladores de tubos y compresores de refuerzo, lo que ofrece flexibilidad.
Datos técnicos
| Top Drive | Drilling Control System | ||
| Type | SMDTHH6000 | Anti-jamming control | Yes |
| Working pressure | Up to 210 bar(rotation) | Rotation control | Adjustable/Reversible |
| Torque | Max. 5800 Nm | Flushing control | Air flow and pressure |
| Rotation speed | 0- 60 rpm | Percussion control | Adjustable power |
| Weight | 340 kg | Control panel | Grouped onboard panel |
| Length with saver sub | 760 mm | Carrier | |
| Position System | Type of carrier | Tracked carrier | |
| Rotary Acurator | 360° ring drilling | Tracks | triple grouser, sealed and lubricated |
| Sliding table | 1.5 m feed parallel positioning | Width | 305 mm / 12 in |
| Pendulum arm | 1.5 m feed parallel positioning in the side walls. | Engine - Deutz | BF4L2011 53kW |
| 1.5 m feed parallel positioning upwards/downwards | Transmission Hydrodynamic | Double-speed motor | |
| Feed dump | +20 Degrees forward | Tramming speed | Max.2.5 km/h |
| Feed drilling | -65 Degrees backward | High gear | Max.2.5 km/h |
| Drill pipe | 4' pipe | Low gear | 1.2 km/h |
| Hydraulic System | Stinger | 4 extendable | |
| Powerpack | 1 x 45 kW | Oscillation angles | +/- 6° |
| Percussion pump | 100 cc (variable) | Gradeability / sideways tilt | Max. 25° / 5° |
| Rotation pump | 55 cc (gear) | Ground clearance | 355 mm |
| Filtration | 10 µ | Centralized greasing points | 10 ports |
| Oil tank volume | 270 liters | Air and water System | |
| Cooler for hydraulic oil | Oil-to-air 1 x 45 kW | Flushing | By air |
| Electric System | Air capacity | 20 m3/min | |
| Standard voltages | 380 -690 V(± 10%), 50 or 60 Hz | Air pressure | 2.5 Mpa / 25 bar |
| Total installed power | 60 kW | Water booster pump | 30 l/min at 45 bar |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Hammer lubrication system | DTHHLu60 with oil level sensor |
| Cable Reel | 80m-100m | Overall with 4' pipes,others depending on options. | |
| Cable reel lubrication | Manual | Weight | 10000 kg |
| Cable reel mud clean | Manual | Transport / bolting length | 6165 mm / 5530 mm |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / bolting width | 2370 mm |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 2550 mm / 2720 mm |
| Percussion hour meters | Optional | Turning width(T-section) | 2800 mm |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R2890 / R5440 mm |
Below dimensions in mm.
Tailor-made specifications accepted.
Tailor-made specifications accepted.
Wheel type available
Split Mountain Machine And Equipment Co.,Ltd. Copyright©splitmountainmachine.com Rights Reserved.