es un jumbo electrohidráulico de tres brazos diseñado para excavaciones rápidas y precisas de túneles y minas. Se trata de un sistema de perforación avanzado con funciones automáticas adicionales e instrumentación opcional para maximizar la productividad y garantizar una tunelización de alta calidad. Permite realizar perforaciones con un diámetro de 45 a 64 milímetros y una profundidad de hasta 6,2 metros (20 pies).
Ventajas
Perforadoras de roca serie HC95 que ofrecen un rendimiento superior con una vida útil prolongada.
Brazos utilitarios con gran cobertura del túnel y paralelismo automático total.
Brazo utilitario para trabajos de servicios y empernado.
Chasis potente con tracción en cuatro ruedas que garantiza un acarreo rápido y un buen nivel de equilibrio.
Datos técnicos
| Perforadora | Control System | ||
| Type | HC95LM x3 | Anti-jamming control | Yes |
| Percussion power | 21kW | Rotation control | Adjustable/Reversible |
| Percussion pressure | Max. 200 bar | Flushing control | Water flow and pressure |
| Percussion rate | 54 - 62 Hz | Percussion control | Adjustable power |
| Rotation torque | 764 Nm | Voltage | 24V |
| Hole size (bolting) | ∅64 - 127mm | Carrier | |
| Shank adapter | T45 / T38 male | Type of carrier | Frame-steered |
| Boom | Carrier articulation | ± 40° | |
| Parallel holding | Complete | Rear axle oscillation | ±10° |
| Lifting angle | Up55°,down 40° | Deutz TCD6.1L06 | 180 kW |
| Swing | left 35°,right 35° | Transmission Hydrodynamic | Dana 32000LD |
| Extension | 2500 mm | Front / Rear Axles | DANA 114 |
| Feed extension | 1600 mm | Tires | 14.00-24 |
| Feed roll-over angle | 360° Rotaty Actuator | Service brakes | Hydraulic wet disc |
| Hydraulic System | Parking and emergency brakes | SAHR fail safewet disc | |
| Powerpack | 3 x 75 kW + 1x 35 kW | Tramming speed | Max.15 km/h |
| Percussion pump | 160 cc (variable) | Gradeability / sideways tilt | Max. 15° / 5° |
| Rotation pump | 180 cc (gear) | Ground clearance | 430 mm |
| Filtration | 10 µ | Centralized greasing points | 10 ports |
| Oil tank volume | 490 liters | Air And Water System | |
| Cooler for hydraulic oil | Oil-to-water 4 x 45 kW | Flushing | By water |
| Electric System | Water pump capacity | 215 l/min | |
| Standard voltages | 380 - 690 V (± 10%), 50 or 60 Hz | Rock drill oil consumption | 180 - 250 g/h |
| Total installed power | 270 kW | Rock drill air consumption | 360 l/min |
| Batteries(Chargeable) | 2 x 12 V, 120 Ah | Air compressor | 1.55 m³/min (7 bar) |
| Cable Reel | 80m-100m | Overall with steels 20', others depending on options. | |
| Cable reel lubrication | Manual | Peso | 46900 kg |
| Cable reel mud clean | Manual | Transport length | 17880 mm |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / drilling width | 3000 mm / 3860 mm |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 3600 mm / 4900 mm |
| Percussion hour meters | Optional | Turning width(T-section) | 4500 mm |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R6300 / R11900 mm |
Optimum operating coverage about 160 m2 with rods / steels 20'.
Tailor-made specifications accepted.
Split Mountain Machine And Equipment Co.,Ltd. Copyright©splitmountainmachine.com Rights Reserved.