Equipos mineros y de excavación de roca
KJ313 Jumbo para minería con viga telescópica
El modelo KJ313 es un equipo de perforación con un solo brazo que está diseñado para excavaciones de altura tan baja como 3.5 metros (11,6 pies). El chasis, el brazo multipropósito y la viga telescópica le brindan a esta perforadora de alto rendimiento una versatilidad nunca antes vista en este tipo de equipos.
Ventajas
Perforadoras con funciones de soporte y avance frontal, lo que optimiza el ciclo de minería.
Brazo corto y viga telescópica que garantizan el acceso a los espacios reducidos.
Diseño en forma de V que ofrece un buen nivel de visibilidad y equilibrio.
Chasis con tracción en cuatro ruedas que garantiza una maniobrabilidad rápida y segura en condiciones de poco espacio.
Datos técnicos
| Hydraulic Drifter/Rock Drill | Control System | ||
| Type | HC109 | Anti-jamming control | Yes |
| Percussion power | 18.8kW | Rotation control | Adjustable/Reversible |
| Percussion pressure | Max. 135 bar | Flushing control | Water flow and pressure |
| Percussion rate | 47Hz | Percussion control | Adjustable power |
| Rotation torque | 780 Nm | Voltage | 24V |
| Hole size (bolting) | ∅42-102 mm | Carrier | |
| Shank adapter | T45 / R38 male | Type of carrier | Frame-steered |
| Boom | Carrier articulation | ± 35° | |
| Parallel holding | Complete | Rear axle oscillation | ± 6° |
| Lifting angle | Up55°,down 16° | Deutz engine F5L912W | 62 kW |
| Swing | left 35°,right 35° | Transmission Hydrodynamic | DT20000 |
| Extension | 1450 mm | Front / Rear Axles | DANA 123 |
| Feed extension | 1250 mm | Tires | 11.00-20 |
| Feed roll-over angle | 360° Rotaty Actuator | Service brakes | Hydraulic wet disc |
| Hydraulic System | Parking and emergency brakes | SAHR fail safewet disc | |
| Powerpack | 1 x 55 kW | Tramming speed | Max.16 km/h |
| Percussion pump | 100 cc (variable) | Gradeability / sideways tilt | Max. 15° / 5° |
| Rotation pump | 45 cc (gear) | Ground clearance | 320 mm |
| Filtration | 10 µ | Centralized greasing points | 10 ports |
| Oil tank volume | 200 liters | Air And Water System | |
| Cooler for hydraulic oil | Oil-to-water 1 x 30 kW | Flushing | By water |
| Electric System | Water pump capacity | 50 l/min | |
| Standard voltages | 380-690V(±10%),50/60Hz | Rock drill oil consumption | 180 - 250 g/h |
| Total installed power | 70 kW | Rock drill air consumption | 300 l/min |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Air compressor | 0.5 m³/min (7 bar) |
| Cable Reel | 80m-100m | Overall with steels 3.7m,others depending on options. | |
| Cable reel lubrication | Manual | Weight | 12000 kg |
| Cable reel mud clean | Manual | Transport length | 11400 mm |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / drilling width | 1750 mm / 2788 mm |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 2000 mm / 3000 mm |
| Percussion hour meters | Optional | Turning width(T-section) | 3450 mm |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R3250 / R5600 mm |
Below dimensions in mm,and against drilling steels/ rods length 3700mm.Optimum operating coverage about 40 m2.
Tailor-made specifications accepted.
Split Mountain Machine And Equipment Co.,Ltd. Copyright©splitmountainmachine.com Rights Reserved.